RTS DTF Merry and Bright Leopard Circle 5.5"
These are RTS DTF prints, these need to be applied with a heat press, not an iron.
Prepress your garment to remove excess moisture. Place transfer face down on item and cover with butcher or parchment paper. Press for 10 - 15 seconds at 325 degrees using heavy pressure. Allow transfer to cool and then remove film. Place parchment or butcher paper over design and repress for 5 seconds.
**If design does not peel properly when you pull up the first edge it may not be cool enough, gently lay film back down and press for another 5 seconds and then allow garment to cool completely before peeling.